The Beachcomber Hot Tub Control Panel is your central command center, offering an intuitive interface with an LCD display and straightforward buttons for effortless control over temperature, jets, lighting, and essential safety features designed for a seamless spa experience.
1.1 Overview of the Control Panel Features
The Beachcomber Hot Tub Control Panel features an intuitive LCD display and user-friendly buttons, allowing seamless control over temperature, jets, and lighting. It includes advanced settings for filter cycles, economy mode, and diagnostic messages. The panel also provides essential safety features, such as overheating protection and emergency shutdown options. Designed for convenience, it offers a clear interface to monitor and adjust settings, ensuring optimal performance and a relaxing spa experience. The control panel is compatible with various Beachcomber models, including LEEP, Hybrid3, and ET-7 configurations.
1.2 Importance of the Control Panel for Hot Tub Operation
The control panel is the central command center for your Beachcomber Hot Tub, enabling precise control over temperature, jets, and lighting. It ensures safe and efficient operation by monitoring settings and providing real-time feedback. The panel’s intuitive design allows for easy adjustments, while its safety features, such as overheating protection and emergency shutdown, protect both users and the system. Proper use of the control panel is essential for maintaining optimal water conditions, extending equipment lifespan, and ensuring a safe, enjoyable spa experience.
Setting Up Your Beachcomber Hot Tub for the First Time
Ensure all connections are secure and follow the pre-startup checklist. Power on the system, verify the software version display, and refer to the manual for initial setup guidance.
2.1 Pre-Startup Checklist
Before powering on your Beachcomber Hot Tub, ensure all connections are secure and properly tightened. Check union fittings on the Hybrid3 or LEEP equipment for tightness and gasket placement. Verify the Heatshield cover is in place to protect against freezing. Ensure the filter cycles are set according to your usage, with default settings like F4 (4 hours) and 2C (twice a day). If using Economy mode, adjust filter times to maintain desired temperature during usage. Review safety guidelines and ensure all components are ready for operation. Refer to the manual for model-specific instructions, such as ET-7 configurations.
2.2 Initial Power-On Instructions
When first powering on your Beachcomber Hot Tub, ensure the system is properly connected and all safety precautions are in place. The control panel will display a series of numbers indicating the software version and voltage input. The first filter cycle will start automatically, 6 minutes after power-up. Default settings like F4 (4 hours) and 2C (twice a day) are pre-programmed for filter cycles. If using Economy mode, adjust filter times to align with your usage schedule. Always refer to the start-up instructions in the manual for specific guidance, especially for models like ET-7 or Hybrid3 Editions.
2.3 Understanding the Software Version Display
Upon initial power-on, the Beachcomber Hot Tub Control Panel displays a software version number and voltage input, essential for troubleshooting and system verification. This information ensures compatibility with your hot tub model and helps identify any potential software updates. The display sequence is a normal part of the startup process, confirming the system is operational. Note the version details for future reference or when contacting customer support. This step ensures your control panel is functioning correctly and ready for use, aligning with default settings like F4 (4 hours) and 2C (twice a day) for optimal performance.
Operating the Beachcomber Hot Tub Control Panel
The Beachcomber Hot Tub Control Panel offers intuitive operation, allowing easy adjustment of temperature, jets, and lighting through its LCD display and user-friendly interface, ensuring a seamless spa experience.
3.1 Navigating the LCD Display
The Beachcomber Hot Tub Control Panel features an intuitive LCD display designed for easy navigation. Use the buttons to scroll through options, select settings, and adjust features like temperature and jets. The display shows current temperature, time, and active modes, ensuring you can monitor and control your spa experience effortlessly. Error codes and messages also appear here, guiding you to resolve issues quickly. The interface is user-friendly, making it simple to access and adjust settings for optimal relaxation and maintenance.
3.2 Adjusting Temperature Settings
To adjust the temperature on your Beachcomber Hot Tub Control Panel, press the temperature button until your desired setting appears on the LCD display. The system allows you to set the temperature between 68°F and 104°F (20°C to 40°C). Once set, the control panel will maintain the selected temperature. For energy efficiency, consider using Economy Mode, which adjusts filter cycles to heat the water only during your usual usage times, ensuring optimal performance and comfort while minimizing energy consumption.
3.3 Activating Jets and Lighting
To activate the jets, press the jet button on the control panel until your desired speed is selected. For lighting, press the light button to cycle through color options or turn the lights off. The EverLite Lighting System offers a variety of colors and modes for enhanced ambiance. Jets and lights can be adjusted independently to customize your spa experience. The system automatically turns off lights after a set period to conserve energy. Always refer to your specific model’s instructions for additional features or settings.
Hot Tub Configurations and Equipment Diagrams
Beachcomber hot tubs come in configurations like LEEP Portable, Hybrid3 Edition, and ET-7 Topside Control Panel (Europe Only), each with specific diagrams and setup instructions for proper installation and operation.
4.1 LEEP Portable Equipment Configuration
The LEEP (Lightweight, Energy-Efficient Portable) system is a compact, portable configuration designed for easy installation and mobility. It features a self-contained unit with a pump, heater, and control panel, making it ideal for various hot tub setups. The LEEP configuration is known for its energy efficiency and durability, with components like the Heatshield cover protecting against freezing. Proper setup involves ensuring all union fittings are secure and gaskets are in place to prevent leaks. Refer to the manual for specific installation and maintenance guidelines to optimize performance and longevity of your LEEP-equipped Beachcomber hot tub.
4.2 Hybrid3 Edition Equipment Configuration
The Hybrid3 Edition offers a powerful and energy-efficient setup, combining advanced filtration and heating systems. It features a 2-speed filter pump or Hush Pump, ozone generator, and intuitive controls. The factory default filter cycle settings are F4 (4 hours) and 2C (twice a day). For Economy mode, adjust filter times to match your usage. The Hybrid3 is designed for durability, with components like the Heatshield cover protecting against freezing. Proper installation ensures optimal performance, with union fittings and gaskets requiring hand-tightening to prevent leaks. Regular maintenance, such as checking gaskets, is essential for longevity.
4.3 ET-7 Topside Control Panel (Europe Only)
The ET-7 Topside Control Panel, designed for European models, offers advanced control over your hot tub’s operations. It features a 2-speed filter pump and ozone generator, with factory default settings of F2 (2 hours) and 2C (twice a day) for filter cycles. Adjust these times in Economy mode to align with your usage. The panel simplifies monitoring and adjusting temperature, jets, and lighting. Regular maintenance, such as checking gaskets and ensuring proper fit, is essential for optimal performance and leak prevention. Refer to the operating instructions for detailed guidance on setup and troubleshooting.
Filter Cycles and Maintenance
Understand and adjust filter cycles to maintain clean water. Factory defaults include F2 (2 hours) and 2C (twice a day). Regular maintenance ensures optimal performance and longevity.
5.1 Understanding Filter Cycle Settings
Filter cycles are essential for maintaining clean and safe water. The control panel allows you to set specific times for filtration. Factory defaults include F2 (2 hours) and 2C (twice a day). Adjust these settings based on your usage to ensure optimal water quality. The first filter cycle starts 6 minutes after power-on. For Economy mode, modify filter times to align with your typical hot tub usage. Regular maintenance, like cleaning filters, ensures efficiency. Properly set filter cycles prevent contamination and extend the lifespan of your hot tub’s equipment.
5.2 Adjusting Filter Times for Economy Mode
Economy Mode optimizes energy use while maintaining water quality. Adjust filter times to ensure water is heated to your desired temperature during typical usage. Default settings include F2 (2 hours) and 2C (twice a day). Use the control panel to modify these times. Navigate to the filter cycle menu, select your preferred duration, and save the changes. This ensures efficient heating and filtration without unnecessary energy consumption. Test different settings to find the balance that suits your hot tub usage patterns and energy-saving goals.
5.3 Maintenance Tips for Filter Efficiency
Regular maintenance ensures optimal filter performance. Clean filters monthly by rinsing with a garden hose or soaking in a filter cleaner. Check for debris buildup and replace worn-out filters as needed. Proper installation after cleaning is essential to maintain water flow. Ensure the control panel settings align with your usage patterns to prevent overloading the system. Regularly test water quality and adjust chemical levels to prevent mineral buildup. A well-maintained filter system enhances water clarity, reduces energy consumption, and prolongs the lifespan of your hot tub equipment.
Troubleshooting Common Issues
The control panel helps diagnose issues with error codes like OHS or OH for overheating. Regularly check filter cycles and reset the panel if necessary to maintain optimal performance.
6.1 Diagnosing Error Codes
The control panel displays error codes like OHS or OH, indicating issues such as overheating. Refer to the diagnostic guide in your manual for specific code meanings. If your hot tub shows an error, check the display for details and follow the recommended troubleshooting steps. For persistent issues, contact Beachcomber support for assistance. Regular maintenance and filter checks can prevent many common problems, ensuring smooth operation and extending the lifespan of your hot tub.
6.2 Resolving Overheating Problems
If your Beachcomber hot tub overheats, it may display error codes like OHS or OH. To resolve this, turn off the power and remove the Heatshield to allow natural cooling. The system should automatically reset once the temperature drops to a safe level (around 107°F/41.7°C). If the issue persists, ensure the filter is clean and functioning properly; Contact Beachcomber support if the problem continues, as it may require professional assistance. Regular maintenance and monitoring can help prevent overheating issues.
6.3 Resetting the Control Panel
To reset the Beachcomber Hot Tub Control Panel, first, ensure the power is turned off at the circuit breaker. Press and hold the “Jets” and “Light” buttons simultaneously for 10 seconds while turning the power back on. Release the buttons and wait for the system to reboot. This process will restore default settings without erasing your saved preferences. If issues persist, consult your user manual or contact Beachcomber support for further assistance. Regular resets can help maintain optimal performance and resolve minor software glitches.
Safety Instructions and Precautions
Always follow safety guidelines to ensure a safe hot tub experience. Check all components before use, avoid overheating, and keep the area clear of obstacles. In case of an emergency, turn off the power immediately and seek assistance if needed.
7.1 Important Safety Guidelines
Ensure a safe and enjoyable hot tub experience by following essential safety guidelines. Persons with infectious diseases or impaired health conditions should avoid using the hot tub. Never use the hot tub while under the influence of alcohol or drugs, as this increases the risk of overheating and drowning. Always supervise children and pets near the hot tub. Keep the area around the tub clear of obstacles to prevent accidents. Be aware of the temperature settings to avoid burns, and never exceed the recommended water temperature. Regularly inspect the hot tub and its components for damage or wear.
7.2 Emergency Shutdown Procedures
In case of an emergency, immediately shut off the power to the hot tub at the circuit breaker or electrical panel. Remove the Heatshield to allow the water to cool naturally. If the hot tub does not reset automatically when the temperature drops to 107°F (41.7°C), keep the power off and contact your Beachcomber store for assistance; Never attempt to repair the system yourself, and always prioritize safety to prevent accidents or further issues. Follow these steps to ensure a safe and controlled shutdown process.
7.3 Health Considerations for Hot Tub Use
Always adhere to health guidelines when using your Beachcomber hot tub. Individuals with heart conditions, high blood pressure, or other medical issues should consult a healthcare provider before use. Avoid using the hot tub if you have open wounds or infectious diseases. Pregnant women and those under the influence of alcohol or drugs should not use the hot tub due to increased risk of overheating or accidents. Monitor water temperature closely to prevent discomfort or health risks, ensuring a safe and enjoyable experience for all users.
Winterization and Drainage Procedures
Prepare your Beachcomber hot tub for winter by draining and refilling, ensuring all lines are cleared. Protect against freezing damage with proper circulation and insulation, following specific guidelines for your model.
8.1 Preparing Your Hot Tub for Winter
Preparing your Beachcomber hot tub for winter involves draining and cleaning the system to prevent freezing damage. Start by locating the drain valve, typically found behind the cabinet or under the step, depending on your model. Open the valve to drain the water completely. Use a wet/dry vacuum to remove any remaining water from the pipes. Insulate exposed plumbing and apply a winterization kit if recommended. Ensure the Heatshield cover is securely in place to protect against snow and freezing temperatures. Avoid using the hot tub during extreme cold snaps to prevent damage.
8.2 Draining and Refilling the Hot Tub
To drain your Beachcomber hot tub, locate the black drain/fill valve, typically found inside the cabinet or under the step. Open the valve and attach a garden hose to direct water away from the tub. Allow the system to drain completely. Once empty, clean the filter and inspect for debris. Refill the tub with fresh water, ensuring the level reaches the recommended mark. Use a test strip to check pH and chemical levels before restarting the system. Always refer to your model-specific instructions for precise draining and refilling procedures.
8.3 Protecting Against Freezing Damage
To protect your Beachcomber hot tub from freezing damage, ensure the Heatshield cover is securely in place, as it withstands up to 2 feet of snow. Avoid using it as a support for people or pets. Insulate exposed pipes and ensure proper drainage to prevent ice formation. If draining, locate the black drain/fill valve, typically inside the cabinet or under the step, and direct water away from the tub. Follow specific winterization instructions for your model to safeguard against freezing-related issues.
Advanced Features of the Control Panel
The control panel offers advanced features like the EverLite Lighting System for customizable ambiance, ClearTech UVC for water purification, and adjustable FlexJets for personalized hydrotherapy experiences.
9.1 Using the EverLite Lighting System
The EverLite Lighting System enhances your hot tub experience with customizable ambiance. Press the light button once to cycle through solid colors, blending seamlessly into the next. Each color stays solid for three seconds before transitioning. To turn the lights off, press the button once. This feature adds a relaxing and aesthetic dimension to your spa sessions, allowing you to create the perfect mood. The system is user-friendly and integrates smoothly with the control panel, ensuring effortless operation.
9.2 Adjusting Jets and Hydrotherapy Settings
Adjusting the jets and hydrotherapy settings on your Beachcomber Hot Tub is straightforward. The jets, known as FlexJets, come in four sizes (small, medium, large, extra large) and can be tailored to your preference. Use the control panel buttons to cycle through jet sizes and adjust intensity. This customization allows for a personalized hydrotherapy experience, targeting specific muscle groups for relaxation or deep tissue massage. The system is designed for user convenience, ensuring you can easily modify settings to enhance your spa experience. Experiment with different configurations to find your ideal setup.
9.3 Utilizing the ClearTech UVC System
The ClearTech UVC system is an advanced water care feature designed to sanitize your hot tub water effectively. To utilize it, navigate to the water care settings on your control panel and activate the UVC option. This system works by exposing water to ultraviolet light, reducing the need for harsh chemicals. Regular maintenance, such as cleaning the UV bulb every 3-6 months, ensures optimal performance. The ClearTech UVC system not only enhances water clarity but also creates a safer and healthier soaking environment, making it a key component of your Beachcomber Hot Tub experience.
Water Care and Chemical Maintenance
Proper water care is essential for your hot tub’s longevity. Test and adjust pH levels regularly, use Beachcomber-approved chemicals, and prevent mineral buildup to maintain clarity and safety.
10.1 Testing and Adjusting pH Levels
Regularly test your hot tub water using test strips or a pH kit to ensure levels remain between 7.2 and 7.8. Imbalanced pH can cause skin irritation or damage equipment. Adjust levels by adding Beachcomber-approved chemicals, following the product instructions. High pH may require a pH reducer, while low pH needs a pH increaser. Always wait 30 minutes after adjustments before retesting. Proper pH balance ensures bather comfort and protects your system from corrosion or scaling. Maintain this routine to keep your hot tub water safe and clear.
10.2 Using Beachcomber Water Care Products
Beachcomber water care products are specifically designed to maintain optimal water quality and protect your hot tub system. Always follow the instructions on the product labels for proper dosage and application. These products help prevent algae growth, cloudiness, and bacteria, ensuring a safe and enjoyable soaking experience. Regular use of Beachcomber-sanctioned chemicals supports the longevity of your hot tub and its components. Proper water care also enhances the efficiency of your control panel settings, ensuring consistent performance and a clean, healthy environment for relaxation.
10.3 Preventing Mineral Buildup
Preventing mineral buildup in your Beachcomber hot tub is essential for maintaining water quality and system efficiency. Regularly test and adjust pH levels to prevent scaling. Use Beachcomber-approved water care products designed to inhibit mineral deposits. Flush the system periodically and clean the filter to remove accumulated debris. Consider using a water softener if your supply is hard. Regular draining and refilling of the tub, as recommended, also helps reduce mineral accumulation. These practices protect your hot tub’s components and ensure optimal performance for years to come.
Control Panel Diagnostic Messages
The control panel displays error codes like OHS or OH for overheating issues. If your hot tub doesn’t reset automatically, shut off power and contact Beachcomber support.
11.1 Understanding Error Codes
The Beachcomber control panel displays specific error codes to indicate issues. Codes like OHS or OH signal overheating problems. If your hot tub exceeds 110°F (43.3°C), these codes will appear; To resolve, avoid entering the water, remove the Heatshield to cool it down, and wait for the system to reset automatically when the temperature drops to 107°F (41.7°C). If the issue persists, turn off the power and contact Beachcomber support for assistance. These codes are essential for diagnosing and addressing malfunctions promptly to ensure safe and optimal hot tub operation.
11.2 Troubleshooting Common Display Messages
The Beachcomber control panel may display messages like OHS or OH, indicating overheating. If the water temperature exceeds 110°F (43.3°C), these codes appear. To troubleshoot, remove the Heatshield to allow cooling. The system should reset automatically when the temperature drops to 107°F (41.7°C). If the issue persists, turn off the power and contact Beachcomber support. These messages guide you in identifying and resolving issues quickly, ensuring safe and efficient hot tub operation. Always refer to the manual for specific code meanings and solutions.
11.4 Resetting the Control Panel
To reset the Beachcomber control panel, turn off the power to the hot tub. Press and hold the temperature up and lights buttons simultaneously while turning the power back on. Hold for 5 seconds until the display resets. This process restores factory settings and clears error codes. Note that resetting will erase custom settings, so you’ll need to reconfigure your preferences. Use this feature cautiously and only when necessary, as it will revert all settings to default. Always consult the manual for specific reset procedures tailored to your model.
Warranty and Support Information
Beachcomber offers a comprehensive warranty program, ensuring coverage for your hot tub. Contact their customer support at 1-800-663-6557 for assistance. Find authorized service centers through their official website for expert help and genuine parts.
12.1 Beachcomber Hot Tub Warranty Overview
Beachcomber offers a comprehensive warranty program, ensuring long-term satisfaction and protection for your investment. The warranty covers various components, including the shell, equipment, and controls, with specific durations for each. For instance, the shell is covered under a Lifetime Structural Guarantee, while other parts may have varying warranty periods. The program applies to models like the LEEP and Hybrid3 Editions, providing peace of mind. However, certain exclusions apply, such as fading from natural aging or damage caused by excessive chemical use. Refer to the official documentation for detailed terms and conditions.
12.2 Contacting Beachcomber Customer Support
For assistance with your Beachcomber Hot Tub, contact customer support through their official website or by calling 1-800-663-6557. The support team is available to address inquiries, repair requests, and warranty-related issues. You can also visit your nearest Beachcomber store for personalized help; Ensure to have your model number and details ready for efficient service. Beachcomber’s dedicated team is committed to providing timely and effective solutions to enhance your hot tub experience.
12.3 Finding Authorized Service Centers
To locate an authorized Beachcomber service center, visit the official Beachcomber website and use the “Where to Buy” tool or contact customer support for recommendations. Ensure your hot tub is serviced by certified technicians for genuine parts and warranty compliance. Authorized centers provide expert repairs and maintenance, ensuring optimal performance and longevity of your spa. This network of professionals is dedicated to delivering high-quality service tailored to your specific needs.
The Beachcomber Hot Tub Control Panel is designed to enhance your spa experience with intuitive controls for temperature, jets, and lighting, ensuring safety and relaxation.
13.1 Summary of Key Control Panel Features
The Beachcomber Hot Tub Control Panel offers a user-friendly interface with an LCD display, allowing easy adjustment of temperature, jets, and lighting. It features intuitive buttons for seamless operation, ensuring safety and convenience. The panel includes settings for economy mode, filter cycles, and maintenance reminders. Designed for optimal spa experience, it provides essential controls for hydrotherapy and relaxation. With clear error codes and troubleshooting guides, it simplifies maintenance and troubleshooting, ensuring your hot tub operates efficiently and safely.
13.2 Final Tips for Optimal Hot Tub Experience
For an optimal hot tub experience, ensure regular maintenance of filters and water chemistry. Adjust temperature and jet settings according to your comfort. Use economy mode to save energy and maintain desired heat levels. Always monitor the control panel for error codes and address them promptly. Keep the area around your hot tub clean and clear of obstacles; Finally, refer to your specific model’s manual for tailored guidance, such as ET-55 or ET-7 instructions, to maximize your spa’s performance and longevity.